- Catalog Home
- Exterior Accessories
- Bumper
- Bumper- Rear
Bumper- Rear
- 11-Gauge US Steel Construction
- Retain OEM Receiver Hitch And Wiring
- Pre-Cut Openings To Utilize Factory Sensors
- 100 Pct. Made In The USA
- Ambush Series Rear Bumper
- Textured Gloss Powder Coat Finish
- Light Weight Design Prevents Suspension Fatigue
- CNC Laser Cut
- Double Weld Inside And Out
- Tow Hook Mount
- Gloss Textured Black Powder Coat Finish
- Manufactured In The USA
- Frame Cap Style Bumper
- Provide The Best Obstacle Clearance And Departure Angle
- Grade-8 Hardware For Easy Installation
- The Best Ground Clearance And Departure Angle
- Angled Facets To Improve Its Ability To Slide Over The Rocks
- Installation Requires Cutting / Trimming
- A Laser-Cut Steel Template Is Provided
- Includes High Clearance Recovery Shackle Tabs
- Integrates The Existing Receiver Hitch
- Back Up Lights
- Back Up Sensor Holes
- Retains Receiver Hitch And Wiring Locations
- Pipe And Formed Treadplate
- Gloss Black Powder Coat
- Combination Pipe And Tread Plate Construction
- Gloss Black Powder Coat
- Back Up Lights Included
- Pre-Drilled Sensor Holes
- Retains OEM Receiver Hitch And Wiring Locations
- MADE IN THE USA
- Provides The Highest Ground And Tire Clearance Possible
- Protects The Flares From Trail Hazards
- Full Width
- Integrated Hitch Receiver
- Recovery Shackle Tabs
- Frame Mounted For Strength Without Stress To Body/Bumper
- Single-Action Opens And Closes w/Jeeps Tailgate
- Compatible w/Crawler™ And Bruiser™ Series Rear Bumpers
- Concealed Heavy Duty Pivot w/Tapered Roller Bearings
- SpyderShell™ Armor Coat Finish w/5-Year Warranty
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Protects Vehicle From On And Off-Road Debris
- D-rings Included - 4.75 Ton Capacity
- D-Ring Mounts Welded Inside And Out For Increased Strength
- Black Finish
- Compatible w/Poison Spyder Frame Mounted Tire Carrier
- Large Radius Bends And Die-Formed Features
- Integrated Class III Tow Hitch
- SpyderShell™ Armor Coat Semi-Gloss Black Finish
- Recessed Mounts For LED Backup Lights
- 5 Year Warranty
- Tubular w/Sheet Metal Design
- Keeps Bumper Weight To a Minimum
- Provides Superior Strength Over OEM Rear Bumper
- Tall Corners Keep The Lines Of The Vehicle
- Built In Step Pockets For Easy Bed Access
- OE Sensor Compatible
- Flat Black Powder Coat
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Paintable
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Hardline Front Bumper
- Integrated Steps On Either Side Of The Tailgate
- Durable Formed 3/16in. Steel Construction
- Retain OEM Receiver Hitch And Wiring Locations
- 3/4in. D-Ring Recovery Points
- 2 Stage Black Powder Coat
- Easy To Install!
- Durable; Steel Construction
- Incl. [2] Rough Country Led Cubes
- Integrated Steps For Easy Access To Bed
- Retains Factory Receiver Hitch
- Incl. Backup Sensor Relocators
- 10-Stage Variable Valving
- Durable Steel Construction
- Includes 2 Rough Country Led Cubes
- Integrated Steps For Easy Access To Bed
- Retains Factory Receiver Hitch
- Includes Backup Sensor Relocators
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Rear Bumper
- Mounting Brackets Will Vary With Make/Model
- Brushed Aluminum Skid Plate Included- Works with Factory Hitch
- Fully Welded 1-piece construction- 1.75 in. .095 Wall Tubing
- Pre-Runner Style
- 5 year Finish Warranty- Lifetime Workmanship Warranty
- 3/16 Inch Steel Plate Construction
- Bolt On Installation Includes Hardware
- Dual Shackle Plates For D-Rings Tie To Frame Rails
- License Plate Pocket Reuse OEM Lights
- Dual Process Black Powder Coat Finish
- Retain OEM Tow Hitch
- Can Mount TN-5293 Swing Arm Tire Carrier
- 3/16 in. Cold Rolled Steel Plate Construction
- Dual Shackle Plates Tie To Frame Brackets
- Will Allow For TC 5293 Swing Arm
- Stronger Then OEM Bumper
- Dual Process Black Powder Coat Finish
- Easy At Home Installation With Only Hand Tools
- Return OEM Tow Hitch
- Aggressive Styling
- Integrated Tow Hooks And D-Ring Mounts
- Double Rung Side Step
- Fab Fours Signature Knife Edge Design
- Ease Of Installation
- Includes 16 Gauge Removable Skin
- Sensor Compatible
- 2 Integrated Pod Mounts For Reverse Lights
- Stainless Steel Hardware
- 2 Stage Matte Black Powder Coat
- 11 Gauge Steel Construction
- MADE IN THE USA
- 3/16 in. Steel Plate
- Bumper Step For JT-2965
- Bolt-On Design
- Uses Factory Frame Mounting Holes For Extra Support
- Optional Bed Protector JT-5101
- Two-Stage Light Texture Finish In Black
- 3 Year Finish/Limited Lifetime Warranty
- Easy Bolt-on Installation.
- Aggressive Appearance.
- Incl. [2] Rough Country Led Cubes
- Incl. D-rings
- Retains Factory Receiver Hitch
- Aggressive Design
- Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
- Perfectly Follows The Body Lines
- Side Mounting Slots And Tabs For Various Light Options
- Provides Far More Tire Clearance
- Integrated Shackle Mounts
- Manufactured From Durable 5/32 Steel And 2x.120 Tubing
- Protects Vehicle From On And Off-Road Debris
- Incl. D-Ring Set
- Satin Black Finish
- Installation Hardware Included
- Maximize Performance On The Toughest Trails
- Multi-Faceted Bumper Design
- Plate Steel Bumper Construction
- Recessed Back-Up Lamps
- Integrated Hitch Receiver
- Rock Solid Mounting
- Recovery Shackle Tabs
- Multi-Faceted Design
- Recessed Back-Up Lamps
- Works w/Existing Equipment
- Rock Solid Mounting
- Standard Rear Bumper
- Safely Holds Up To 37 In. Tires
- Innovative Swing-Out System
- Includes 3rd Brake Light Relocation Bracket
- Includes License Plate Relocation Bracket
- Durable Steel Construction
- Superior Strength And Styling
- Give Your Vehicle That Extra Cool Factor
- Two Front Side Openings Allow Light Options
- Sensor Compatible
- 11 Gauge US Steel